Plantation

These shutters are fabricated with a 2-1/2 inch wide louver. We offer two styles: our standard flat louver and our Bel-Aire elliptical louver. These can be used to either dress up a room or give it a casual feel.

Americana DeVenco manufactures new shutters to your exact specifications for your application. We can finish in the color you choose (or raw for you to finish) and all shutters ship pre-hinged and ready to install. You should expect your Americana DeVenco shutters to last into the next generation with little maintenance.

  • Louvers are 2-1/2” wide x 3/8” thick
  • Beaded stile is 2” wide x 1” thick
  • 2” spacing between louvers
  • Top rail, bottom rail, and lock rail are 3/4” thick
  • Tilt control arm is 3/8” wide x 1/2” tall
  • Standard is fabricated from Basswood
  • Shutters can be provided painted, stained, primed, or raw
  • Hanging method (inside mount with butt hinges, hanging stop, or 3-sided or 4-sided frame)
  • Number of panels across the window (based upon width and/or design) • Double hung (two tiers) or single hung (one-tier)
  • Lockrail(s) to separate sections of louvers
  • Hidden tilt rod
  • Lumber (Poplar, Pine, Oak, Sapele Mahogany, etc.)

Hanging Options, Frames, T-Post Diagrams

  • Hanging stop is 1-1/4” wide x 3/4” thick
  • Plantation Surface Mount Frame is 1” wide x 2” thick
  • Plantation Low Profile Surface Mount Frame is 1” wide x 1-3/8” thick
  • Plantation T-Post is 1-3/4” wide x 2” thick
  • Plantation Low Profile T-Post is 1-3/4” wide x 1-3/8” thick
  • Louvers are 2-1/2” wide x 3/8” thick
  • Beaded stile is 2” wide x 1” thick
  • 2” spacing between louvers
  • Top rail, bottom rail, and lock rail are 3/4” thick
  • Tilt control arm is 3/8” wide x 1/2” tall
  • Standard is fabricated from Basswood
  • Shutters can be provided painted, stained, primed, or raw
  • Hanging method (inside mount with butt hinges, hanging stop, or 3-sided or 4-sided frame)
  • Number of panels across the window (based upon width and/or design) • Double hung (two tiers) or single hung (one-tier)
  • Lockrail(s) to separate sections of louvers
  • Hidden tilt rod
  • Lumber (Poplar, Pine, Oak, Sapele Mahogany, etc.)

Hanging Options, Frames, T-Post Diagrams

  • Hanging stop is 1-1/4” wide x 3/4” thick
  • Plantation Surface Mount Frame is 1” wide x 2” thick
  • Plantation Low Profile Surface Mount Frame is 1” wide x 1-3/8” thick
  • Plantation T-Post is 1-3/4” wide x 2” thick
  • Plantation Low Profile T-Post is 1-3/4” wide x 1-3/8” thick

Americana DeVenco Fabricates High Quality, Hand Crafted Shutters

The Plantation shutters you buy today will be enjoyed for years to come. Whether you have a home of period significance, a new home designed to replicate period architecture, or you are renovating and desire a timeless window dressing, our shutters are tailored to your requirements.

  • Solid wood components. There are no finger-jointed or “glued up parts.” All components are solid wood and custom milled to exacting specifications in our shop. There are no ready-made parts, imported parts or stock fabricated parts…and never faux wood.
  • Mortise and dowel construction. Americana DeVenco shutters are not screwed together, stapled, or pinned together. We use old-fashioned cabinetmaker joinery. This assures the shutter will never fall out of square at the joints under its own weight.
  • Nylon rotation pins. Louver operation is smooth and effortless, even if it is refinished numerous times.
  • Proportional design.
    • Plantation 1″ by 2″ beaded stiles assure aesthetically pleasing design as well as structural integrity.
    • 2-1/2″ louvers spaced at 2″ on center provide excellent closure and actual room darkening in daylight.
    • Lockrails are customary at no extra charge based upon the height of the shutter and provide structural support and absolute stability within a panel while allowing upper louvers to function separately from lower louvers.
  • Hanging hinge mortise. Mortising for hanging hinges is standard, allowing a custom fit within the window jamb.
  • Rabbeted stiles. One additional custom feature that provides total privacy and blocks additional light and heat.

 

Americana DeVenco Victorian Shutters Are Constructed of the Finest Material

All wood is milled by us in our shop. There are no prefab or stock-sized parts. All work is done in our shop by skilled craftsmen to the highest standards in the industry today.

Following our state-of-the-art CAD drawings that are reviewed and approved by the customer for accuracy, the components for each shutter are cut by hand, piece by piece, the old-fashioned way. The shutters are then assembled by hand using old-world cabinetmaker construction techniques.

After assembly, each shutter is sanded and buffed by hand and prepared for finishing. All shutters receive a superlative finish in the color specified by you. We can match any brand or a provided color. The result is a quality finish that will be easy to maintain and which should last for many years.

Hardware is carefully set on each shutter, and they are packed like Waterford crystal for shipping.

We Know Plantation

Plantation Shutters give any room a light airy feel seldom seen with any other window décor. In some cases, these shutters actually make a room feel larger, bringing the outdoors in. Couple that with a hidden tilt rod that opens up the center of the panel, and your view becomes less obstructed and more visually appealing. Offering understated elegance to a room with much architectural detail, Plantation shutters can be used in both historical and contemporary settings.

By the late 18th century, the benefit of the Plantation louver had gained popularity in the southern states. Unlike draperies, the louvers deflected the blistering sun and acted as a sunshade while offering ventilation to allow any breezes to flow unimpeded into the house. A lighter, airier feel was produced both with the wide louvers and the fact that they were almost always painted white. Aesthetically pleasing, Plantation shutters fit a range of architectural styles from minimalist to classic while also offering privacy and light control that make them a practical investment.

Stain colors can vary greatly and you can either match trim or use them to create an accent on shutters. Due to the natural aesthetic that wood brings, staining a louvered shutter can offer a rich feel to any room. A library or personal office space is given an air of seriousness with shutters stained in a dark color.

Request a Quote

Room/Descriptor

Example: North West window in Office

What room or window is this product for?

Example: 6 windows

How many windows of the same width & height do you need shutters for?

Example: 8 ft

Please refer to Measurement Guide

Example: 8 ft 6 in

Please refer to Measurement Guide

Additional Measurements

Example: 7 ft or 84 in

Please refer to Measurement Guide

Example: 24 in

Please refer to Measurement Guide

Example: 4 ft

Please refer to Measurement Guide

Please refer to Measurement Guide

Please refer to Measurement Guide

What louver type would you like?

Movement of Shutter Panels

Select one

Do you have a specific number of panels you want?

Do you want standard track hardware or barn door hardware?

What finish would you like on your shutters?

Do you have photos that you would like to share about this rolling shutter request?

Drop files to upload or UPLOAD

Do you have any other information that you would like to share about this shutter?

The next step will allow you to add more shutters and add project information.

Room/Descriptor

Example: North West window in Office

What room or window is this product for?

Example: 6 windows

How many windows of the same width & height do you need shutters for?

Example: 36 inches

What is the total width of the window(s)? Please refer to Measurement Guide

Example: 52 inches

What is the total height of the window(s)? Please refer to Measurement Guide

What is the shutter configuration?

How many panels/leafs across the window do you want?

Can open left or right

Can open each to one side OR can open both to one side (bi-fold)

Can open bi-fold to either side

Opens as bi-fold both left and right

How do you want to mount the shutters?

What finish would you like on your shutters?

Options: Raw, primed, painted, or stained

What hardware would you like included?

Available to match color of hinges

Do you have photos that you would like to share about this window type?

Drop files to upload or UPLOAD

Do you have any other information that you would like to share about this shutter?

The next step will allow you to add more shutters and add project information.

Product price: $1.00
Total options:
Order total:

Ready for Installation

When your Americana DeVenco shutters arrive, they are ready to install—minimal assembly required. Each hanging hinge allows fine-tuning to tolerate minimal adjustments in the installation in order to align each panel with its mate and tolerate potentially out-of-square windows.

Tools required for installation are:

  • Screw gun with Phillips and square drives
  • 1/8” drill bit
  • 1/8” shim

Our staff is available for support Monday through Friday, 8 AM to 4:00 PM CST. Do not hesitate to call.

Resources

Plantation Shutter Diagram
Directions on How to Measure for Interior Shutters
Shutter Order Form
How to Fill Out the Order Form
Shutter Hanging Options & Frames
Hardware Options
Lumber Options
Shutter Installation Instructions

Appendix Image (Click to zoom)